Tru Face Line Corrector CL

Use after your favorite Nu Skin cleanser and toner. Apply day and night to the lines on the forehead and around the eyes and mouth. Then apply the Nu Skin moisturizing treatment of your choice.

For best results, use Tru Face Line Corrector along with ageLOC Galvanic Spa:

 Attach the Focus Area Conductor to the device.

Step 1: apply Tru Face® Line Corrector to the wrinkles and lines you want to reduce. Apply it concentrating on only one area at a time. Make sure to cover the surface of the skin with a thin layer of the product.

Step 2: Press the selector button until the number 3 appears on the screen. This application takes about 5 minutes.

Pro tip: If you apply the treatment to several areas, you can spread the five minutes between them. Small areas typically do not require application longer than 1 to 2 minutes.

Step 3: Moisten hands well with water or NaPCA Moisture Mist. Hold the device with a moistened hand, touch the chrome back sheet at the same time and begin to slowly slide the conductive head over the skin.

Be careful to avoid sensitive areas of the eyes, eyelids and lips.

The device will beep once, two or three times to indicate that it is automatically adjusting to your skin.

Once adjusted, the galvanic application begins. The device will beep every 10 seconds to indicate it is operating, and every 5 seconds when the application is about to end.

Step 4: on completion of the galvanic treatment, the device will emit a longer sound followed by two short ones, and it will turn off automatically. Repeat steps 1 to 3 in each chosen area. At the end of all applications, finish rubbing any excess product into the skin and remove any that remains on the device with a damp towel.