Tru Face Line Corrector CAN

Use after your favorite Nu Skin cleanser and toner. Apply day and night to forehead lines and around the eyes and mouth. Follow with the Nu Skin moisturizing treatment of your choice.

For best results, use Tru Face Line Corrector in conjunction with ageLOC Galvanic Spa:

Attach the Focus Area Conductor to the device.

Step 1: apply Tru Face® Line Corrector to the wrinkles and lines you want to reduce. Apply concentrating only on one area at a time. Be sure to cover the surface of the skin with a thin layer of the product.

Step 2: press the selector button until the number 3 appears on the display. This application takes about 5 minutes.

Pro tip: If you apply the treatment to several areas, you can divide the five minutes among them. Normally, small areas do not require more than 1 or 2 minutes of application.

Step 3: Wet your hands thoroughly with water or NaPCA Moisture Mist. Hold the device in your moistened hand, touch the chrome back plate at the same time and start to slowly slide the conductive head over the skin.

Be careful to avoid the sensitive areas of the eyes, eyelids and lips.

The device will beep once, twice or three times to indicate that it is automatically adjusted to your skin.

Once adjusted, the galvanic application begins. The device will beep every 10 seconds to indicate that it is in operation, and every 5 seconds when the application is about to end.

Step 4: at the end of the galvanic treatment, the device will emit a longer beep followed by two short beeps, and will automatically turn off. Repeat steps 1 to 3 on each selected area. At the end of all applications, finish rubbing any remaining product into the skin and remove any remaining product from the device with a damp towel.